Configuring HAProxy in Front of Admin Router

Using the HAProxy to set up an HTTP proxy for the DC/OS Admin Router

You can use HAProxy to set up an HTTP proxy in front of the DC/OS Admin Router. This was previously useful to allow Admin Router to present a custom server certificate to user agents connecting to the cluster via HTTPS. From DC/OS 2.2 this can be achieved more directly using custom external certificates.

The HTTP Proxy must perform on-the-fly HTTP request and response header modification, because DC/OS is not aware of the custom hostname and port that is being used by user agents to address the HTTP proxy.

The following instructions provide a tested HAProxy configuration example that handles the named request/response rewriting. This example ensures that the communication between HAProxy and DC/OS Admin Router is TLS-encrypted.

  1. Install HAProxy 1.6.9.

  2. Create an HAProxy configuration for DC/OS. This example is for a DC/OS cluster on AWS. For more information on HAProxy configuration parameters, see the documentation.

    You can find your task IP by using the agent IP address DNS entry.



    • taskname: The name of the task.
    • framework_name: The name of the framework, if you are unsure, it is likely marathon.
      log local0
      log local1 notice
      maxconn 20000
      pidfile /var/run/
      log            global
      option         dontlog-normal
      mode		 http
      retries             3
      maxconn          20000
      timeout connect  5000
      timeout client  50000
      timeout server  50000
    frontend http
      # Bind on port 9090. HAProxy will listen on port 9090 on each
      # available network for new HTTP connections.
      # Specify your own server certificate chain and associated private key.
      # See
      # bind *:9091 ssl crt /path/to/browser-trusted.crt
      # Name of backend configuration for DC/OS.
      default_backend dcos
      # Store request Host header temporarily in transaction scope
      # so that its value is accessible during response processing.
      # Note: RFC 7230 requires clients to send the Host header and
      # specifies it to contain both, host and port information.
      http-request set-var(txn.request_host_header) req.hdr(Host)
      # Overwrite Host header to 'dcoshost'. This makes the Location
      # header in DC/OS Admin Router upstream responses contain a
      # predictable hostname (NGINX uses this header value when
      # constructing absolute redirect URLs). That value is used
      # in the response Location header rewrite logic (see regular
      # expression-based rewrite in the backend section below).
      http-request set-header Host dcoshost
    backend dcos
      # Option 1: use TLS-encrypted communication with DC/OS Admin Router and
      # perform server certificate verification (including hostname verification).
      # If you are using the community-supported version of DC/OS, you must
      # configure Admin Router with a custom TLS server certificate, see
      # /mesosphere/dcos/2.2/administering-clusters/. This step
      # is not required for DC/OS Enterprise.
      # Explanation for the parameters in the following `server` definition line:
      #   IP address and port that HAProxy uses to connect to DC/OS Admin
      #   Router. This needs to be adjusted to your setup.
      # ssl verify required
      #   Instruct HAProxy to use TLS, and to error out if server certificate
      #   verification fails.
      # ca-file dcos-ca.crt
      #   The local file `dcos-ca.crt` is expected to contain the CA certificate
      #   that Admin Router's certificate will be verified against. It must be
      #   retrieved out-of-band (on Mesosphere DC/OS Enterprise this can be
      #   obtained via https://dcoshost/ca/dcos-ca.crt)
      # verifyhost
      #   When verifying the TLS certificate presented by DC/OS Admin Router,
      #   perform hostname verification using the hostname specified here
      #   (expect the server certificate to contain a DNSName SAN that is
      #   equivalent to the hostname defined here). The hostname shown here is
      #   just an example and needs to be adjusted to your setup.
      server dcos-1 ssl verify required ca-file dcos-ca.crt verifyhost
      # Option 2: use TLS-encrypted communication with DC/OS Admin Router, but do
      # not perform server certificate verification (warning: this is insecure, and
      # we hope that you know what you are doing).
      # server dcos-1 ssl verify none
      # Rewrite response Location header if it contains an absolute URL
      # pointing to the 'dcoshost' host: replace 'dcoshost' with original
      # request Host header (containing hostname and port).
      http-response replace-header Location https?://dcoshost((/.*)?) "http://%[var(txn.request_host_header)]\1"
  3. Start HAProxy with these settings.