How to connect your cluster to an external LDAP directory
This guide shows you how to configure your DKP cluster so that users can log in with the credentials stored in an external LDAP directory service.
Step 1: Add LDAP connector
Each LDAP directory is set up in its own specific manner, so these steps are non-trivial. The following example does not cover all possible configurations. Refer to the Dex LDAP connector reference documentation for more details.
The following example configures a DKP cluster to connect to the Online LDAP Test Server.
Create a YAML file (
ldap.yaml) similar to the following:
apiVersion: v1 kind: Secret metadata: name: ldap-password namespace: kommander type: Opaque stringData: password: password --- apiVersion: dex.mesosphere.io/v1alpha1 kind: Connector metadata: name: ldap namespace: kommander spec: enabled: true type: ldap displayName: LDAP Test ldap: host: ldap.forumsys.com:389 insecureNoSSL: true bindDN: cn=read-only-admin,dc=example,dc=com bindSecretRef: name: ldap-password userSearch: baseDN: dc=example,dc=com filter: "(objectClass=inetOrgPerson)" username: uid idAttr: uid emailAttr: mail groupSearch: baseDN: dc=example,dc=com filter: "(objectClass=groupOfUniqueNames)" userAttr: DN groupAttr: uniqueMember nameAttr: ou
Also note that for demonstration purposes, the configuration shown above uses
In production, you should protect LDAP communication with a properly-configured transport layer security (TLS). When using TLS, the admin can add
spec.ldapto skip server certificate verification, if needed.
Run the following command to deploy the LDAP connector.
kubectl apply -f ldap.yaml
Step 2: Log in
https://<YOUR-CLUSTER-HOST>/tokenand initiate a login flow.
On the login page choose the
Log in with <ldap-name>button.
Enter the LDAP credentials, and log in.
It is likely that the Dex LDAP connector configuration is not quite right from the start. In that case, you need to be able to debug the problem and iterate on it. The Dex log output contains helpful error messages as indicated by the following examples.
Errors during Dex startup
If the Dex configuration fragment provided results in an invalid Dex config, Dex does not properly start up. In that case, reviewing the Dex logs will provide error details. Use the following command to retrieve the Dex logs:
kubectl logs -f dex-66675fcb7c-snxb8 -n kommander
You may see an error similar to the following:
error parse config file /etc/dex/cfg/config.yaml: error unmarshaling JSON: parse connector config: illegal base64 data at input byte 0
Another reason for Dex not starting up correctly is that
https://<YOUR-CLUSTER-HOST>/token throws a 5xx HTTP error response after timing out.
Errors upon login
Most problems with the Dex LDAP connector configuration become apparent only after a login attempt. A login failing from misconfiguration will result in an error page showing only
Internal Server Error and
Login error. You can then usually find the root cause by reading the Dex log, as shown in the following example:
kubectl logs -f dex-5d55b6b94b-9pm2d -n kommander
You can look for output similar to this example:
[...] time="2019-07-29T13:03:57Z" level=error msg="Failed to login user: failed to connect: LDAP Result Code 200 \"Network Error\": dial tcp: lookup freeipa.example.com on 10.255.0.10:53: no such host"
Here, the directory’s DNS name was misconfigured, which should be easy to address.
A more difficult problem occurs when a login through Dex through LDAP fails because Dex was not able to find the specified user unambiguously in the directory. That could be the result of an invalid LDAP user search configuration. Here’s an example error message from the Dex log:
time="2019-07-29T14:21:27Z" level=info msg="performing ldap search cn=users,cn=compat,dc=demo1,dc=freeipa,dc=org sub (&(objectClass=posixAccount)(uid=employee))" time="2019-07-29T14:21:27Z" level=error msg="Failed to login user: ldap: filter returned multiple (2) results: \"(&(objectClass=posixAccount)(uid=employee))\""
Solving problems like this requires you to review the directory structure carefully. (Directory structures can be very different between different LDAP setups.) Then you must carefully assemble a user search configuration matching the directory structure.
Notably, with some directories, it can be hard to distinguish between the cases “properly configured, and user not found” (login fails in an expected way) and “not properly configured, and therefore user not found” (login fails in an unexpected way).
Example for successful login
For comparison, here are some sample log lines issued by Dex after successful login:
time="2019-07-29T15:35:51Z" level=info msg="performing ldap search cn=accounts,dc=demo1,dc=freeipa,dc=org sub (&(objectClass=posixAccount)(uid=employee))" time="2019-07-29T15:35:52Z" level=info msg="username \"employee\" mapped to entry uid=employee,cn=users,cn=accounts,dc=demo1,dc=freeipa,dc=org" time="2019-07-29T15:35:52Z" level=info msg="login successful: connector \"ldap\", username=\"\", email=\"firstname.lastname@example.org\", groups="